lc series ? mini-sip ssr ? ratings to 2a @ 280 vac ? dual scr output (normally open) ? dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output ? plastic encapsulated product selection control voltage 1.5a 2a 4-10 vdc lc241 lc242 available options output specifications (1) description lc241 lc242 operating voltage (47-63hz) [vrms] 12-280 12-280 transient overvoltage [vpk] 600 600 maximum off-state leakage current @ rated voltage [marms] 0.1 0.1 minimum off-state dv/dt @ maximum rated voltage [v/sec] (3) 500 500 maximum load current [arms] 1.5 2.0 minimum load current [arms] 0.025 0.025 maximum surge current (16.6ms) [apk] 80 100 maximum on-state voltage drop @ rated current [vpk] 1.5 1.5 minimum power factor (with maximum load) 0.5 0.5 input specifications (1) description parameters control voltage range 4-10 vdc must turn on voltage 4.0 vdc must turn off voltage 1.0 vdc typycal input current @ 5 vdc 15 madc nominal input impedance 300 ohm maximum turn-on time [msec] (4) 1/2 cycle maximum turn-off time [msec] 1/2 cycle
general specifications description parameters dielectric strength, inpu t/output/base (50/60hz)(2) 2500 vrms minimum insulation resistance (@ 500 vdc)(2) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80 ? c ambient storage temperature range -40 to 125 ? c weight (typical) 0.15 oz. (4.3g) encapsulation ul94v-0molded epoxy general notes 1) all parameters at 25c un less otherwise specified. 2) dielectric and insulation resistence are measured between input and output. 3) off-state dv/dt test met hod per eia/narm standard rs-443. 4) 0.1 msec for random turn-on version (r suffix). mechanical specifications dc control pin 1: ac load pin 2: ac load pin 3: +dc control pin 4: -dc control thermal derate information agency approvals designed in accordance with the requirements of iec 62314 e116950 rev. 120911
annex - enviromental information
|
